Q Acoustics 3030i shelf speaker is the latest addition to the Award-winning Q Acoustics 3000i range.
3030i shelf speaker often loudspeaker that won’t be easily spotted for the fine proposition it's ,
amongst a herd of rivals that s though to form a small two-way loudspeaker stand out, visually or sonically – but that’s the point with Q Acoustics 3030i. Rather than stand out as an acoustic hooligan, it’s a model of poise and correctness.
The planning approach employed by Q Acoustics is entirely conventional, mounting a bass/midrange unit and tweeter during a compact cabinet measuring 200mm wide, 320mm high and 313mm deep, the grille and rear terminals adding 16mm. With spade or bare wire connection depth is unaltered, but 4mm banana plugs protrude rearwards as always. With a rear port alittle amount of room needs to be left behind in any case, but not much – a couple of inches or centimetres will do.
The graceful Graphite Grey finish of our samples and therefore the neat, polished alloy trims round the drive units when the grille, held by invisible magnets, is removed. The grille affects frequency response little, just a tad more treble is out there with grille off.
Measurement showed the 3030i has broad dispersion therefore the cabinet can be pointed straight down an area or toed-in toward the listening position without obvious difference between the two.
The 165mm bass/midrange unit has an impregnated and coated paper cone, Q Acoustics say, and closely above it sits a 22mm tweeter that appears sort of a cloth dome to me. i assumed it had been ring-dome, but perhaps not. All the same, measurement showed it has a smooth response and wide dispersion for even tonal balance. The cupboard is sturdy, weighing 6.4kgs. additionally to the Graphite Grey of our review samples, Arctic White, English Walnut or Carbon Black are available.
Q Acoustics 3030i speaker has bass extension and control superior to that of any nominal rival. Factor in the same tweeter and mounting as used in the 3050i floorstander, and 3030i redefines the scale and fidelity available from such a competitively costed stand mount speaker.
- Shelf or stand mount the 3030i speakers, whichever works with your current setup and design.
- Impressive sound and aesthetic enhancements for improved overall performance and design.
- We've increased the cabinet size (taller and deeper than 3020i model) for a larger scale sound and deeper bass
- Our 3030i speakers utilize Point-to-Point (P2P) bracing techniques that give extraordinary rigidity and virtually eliminates distortion.
- Capable of astonishingly low 46Hz bass response despite excellent 88dB sensitivity
No comments:
Post a Comment